Berry Fruit Processing Line

We provide you complete Berry Fruit Processing Line with highest quality standards worldwide. ProExFood designs, manufactures and install complete Turn-Key Solution for Fresh or Frozen Berry Fruit Processing.

Category:

BERRY FRUIT PROCESSING LINE

This line is dedicated to cleaning berry fruit such as: 

  • Blueberry
  • Lingonberry
  • Sea Buckthorn Berry
  • Cranberry 
  • Elderberry
  • Rowanberry
  • Red / Black Currant
  • Chokeberry
 
 

CONCEPT

This line can start right after freezing tunnel or can be arranged with hopper for crushing frozen blocks of products. After crumbling, small stalks are removed on a destalker. Next, light contaminants are separated on the air blower. For difficult products, polishing machine would be recommended, in order to remove leaves sticking to frozen berry fruits. After that, the product can be checked on optical / laser sorter. Finally, row material is packed into carton boxes or paper/film bags. 

HERE ARE SOME EQUIPMENT USED IN THE LINE

PXFCCT-600 CRADLE CONTAINER TIPPER

This machine is dedicated to emptying standard pallet boxes. It is a compact construction allows for allocation in places with limited area. 

Capacity: up to 15 cycles/h depending on the product

Maximum load: 600 kg

 

PXF LBH LUMP BREAKING HOPPER TANK

Machine is designed to crushing blocks of frozen product such as fruits or vegetable from smaller packages as bags, cartons or crates. 

The operator takes package from the pallet – there is designed pallet platform for easy access – and next empty package to the bunker. Bigger blocks are crushed on a safety grid, smaller by two rotating shafts. It is possible to adjust the gap between shafts according to processed product type. Beneath the bunker it is possible to fit elevator, conveyor or vibratory feeder to collect crushed product.  

 

PXFAS-4 AIR SEPARATOR FOR FRESH AND FROZEN FRUITS

We design and manufacture many different kind of air separator for different berry fruits. 

This Air Separator dedicated to dry cleaning of fruits  such as currants or blueberries from light impurities like leaves, grass, moss, etc. 

According to configuration it is also possible to use it on a warm side before washing and freezing or after freezing, 

Cleaned product is loaded into elevator’s hopper. Next, product goes to the air separation section, wehre bottom air stream removes all impurities lighter than processed product. It is possible to dismantle an elevator from air chamber and use it as a stand-alone device. 

 

PXF ODS3/ODS6 BERRY FRUIT DESTALKER

The machine is designed to remove stems, staks and leaves from frozen berry fruits such as gooseberry, currant, blueberry, bilberry, chokeberry, sea-buckthorn, elderberry, etc. 

The frozen fruits fed to the hopper fall into the first (breaking) chamber, where they are crushed by the rotating crusher shaft. Inside the cylindrical sieve, the fruits are set in intense motion generated by screw conveyor the cylindrical sieve hole edges remove fruit stems, stalks and leaves etc. that fall through the hole into machine outlet. 

The use of the cylindrical rotary sieve in PXF ODS6 significantly improves the des talking efficiency by reduction of downtime necessary for periodic cleaning of the clogged stalking holes. 

PXFPO2 BERRY FRUIT POLISHER

The berry fruit polisher is designed to final and precise separation of stems, stalks and leaves from the frozen berry fruit such as; blueberry, currant, bilberry or chokeberry, etc. 

The fruit is put to the charging hopper and pushed by means if brushes towards the discharge chute. During that travel, the fruit is moved through a cylinder with perforated sieves and the polishing effect is achieved. As a consequence of that process, large amounts of frost are formed from the separated fruit parts and it is adhered to the sieve. The sieve construction ensures its easy replacement for cleaning time. 

The machine is equipped with a bottom guard for waste and adjustable feeding hopper. 

PXFKW2/4 TWO DECK VIBRATORY CALIBRATOR

ProexFood designs and manufactures many types of calibrators for many different type of fruit and vegetable. 

The vibratory calibrator is designed to sott frozen fruit and vegetables. The calibration sie is adjustable by installation of easily replaceable sieve decks with suitably selected meshes. 

The product is to be sorted can be fed to the machine directly from the cooling tunnel belt or via the conveyor spreading the product along its entire width. In the vibration bath are installed two layers of sieves one upon each other. Such construction gives possibility to obtain 3 fractions of raw material. 

The sieve decks are installed on the supporting frames and fastend with the quick couplers, which cuts down their replacement time to 5-10 min without a need of using any tools. 

 

PROEXFOOD PACKAGING SOLUTIONS

At ProExFood, we design manufacture complete solutions for packaging Berry fruits. From Weighing Batcher to fully automated Palletizing Solutions. 

Belt weighing Batcher

Belt weighing batcher for valve bags

Vibrating Batcher

Belt Conveyor with stitcher 

Film Bag Sealer

Check Weigher with belt conveyor 

Carton Closing machine

Metal Detector 

Palletizing Solutions 

 

Milwaukee, WI, USA

Düsseldorf, Germany

Sales@proexfood.com

Copyright © 2019 ProEx Food, LLC
en English
X
Scroll to Top